High Power Factor and Extremely Low THD at Light Load, Reconfigurable to Dual-phase Interleaved PFC
Dedicated Charger Emulation, Selection of Current Limit & Fault Handling, Configurable via Jumpers
GUI for Control of all Functions, Built-in Highest Current Algorithm, Custom Emulation Profiles
Burst Mode/DCM Function to Reduce No-Load Power Dissipation to Meet Green-Mode Requirements
Accurate AC Power Metering, Current Balancing Between Two Phases, High Efficiency
High Voltage Resonant LLC Converter Control Card based EVM, Quick Start Graphical User Interface
Interleaved Boost PFC Topology, AC Power Metering, High Efficiency, Current Balancing Between Phases
Output Under-Voltage Protection, AC Input Brown-Out Protection, Enhanced Dynamic Response
Phase Management Capability, Soft Start on Overvoltage, Improved Light Load Efficiency
Power Converter Based on Emulated Current Mode Control, Good Conversion Efficiency
Primary Side Control for Tight Constant Current Performance, Fast Dynamic Response
Self Synchronizing Secondary Side Controller, Sync Input for CCM Operation
Current Mode Control, Eco Mode, External Slow Start, Power Good, Integrated High Side FET
Output Voltage of 5V, Load Current of 1mA to 250mA, Input Voltage of 22V to 75V
300mA Sync Buck Converter, 16 Selectable O/P Voltage Between 1.8V-3.3V, 3.3V-10V I/P Voltage
High Efficiency at Light Load, Output 1V-28V, Synchronous Rectification, Frequency Synchronization
1A Max O/P, SMPS Based on VIPER26, Short-circuit Protected
Upto 9 Monitors in a Single System, Monitors 3.16V-26V & Down to 1.058A, Standard I2C Interface
2-Phase Interleaved PFC, Regulated DC Output, Isolated USB JTAG Emulation
93% Efficiency, 2A/1A O/P Current at 5V in Buck Mode & 1.3A at 5V in Boost Mode, Power Good Output
Multiple Power Conversion Stages, Parallel 2 Buck Converters, Digital Voltmeter, 9VDC, Isolated USB
10V to 38V Input, 60V Max Output Voltage, 5
85 - 264Vrms Input Voltage, -12VDC, 150mA Output, 4kV/8 mm Isolation, FR4 Single-side PCB
80% Efficiency, 47Hz to 63Hz Input Frequency, 85 to 264V AC Input Voltage Range
Powers upto 25.5W, Robust 100V, 0.5ohm Hotswap MOSFET, High-efficiency & Eco-mode, PowerPad TSSOP
MSP430 CPU, High-voltage Driver, 105V Boost Switch/Power Diode/Diff Amp, Multiple I/O, 3.6V-5.5V I/P
Fast Feed Forward Half Cycle RMS Control Loop, Universal AC Line Input, 390V Regulated DC Output
360W, 390V Output, Average Current Mode PWM Control, No AC Line Sensing Needed, Soft-Start
3-Phase 150W Auxiliary Dual Output SMPS, Stand-By Switching Frequency greater than 35kHz
Overcurrent and Short Circuit Protection, Switch Mode Converter Operates at Frequency of 50kHz
Overcurrent and Short Circuit Protection, Switch Mode Converter Operates at Frequency of 51kHz
Evaluate the Performance of the TPS55340 DC-DC Boost Converter in a SEPIC Topology
Evaluation Module for TPS62125 Buck Regulator
Single Output of 24V at 2A, Input Voltage 90VAC to 265VAC
4.5V to 60V Input, Integrated 90mO High Side N-Channel MOSFET, 100kHz to 2.5MHz Switching Frequency
8V to 60V Supply, Integrated 90mohm MOSFET, 100kHz to 2.5MHz Fs, 1
Connection of any Solenoid Through a Connector & Wires, Supply Operation Range: 7-48VDC / 100-240VAC
500W AC-DC Power Supply, 90V-264VAC Supply, 4kV Isolation, PFC/LLC Control Stage, Step-down DC-DC
Offline High-Side Buck Power Supply, 225mA 13VDC O/P, Thermal Shutdown, 85-265VAC Pwr
Off-Line Boundary Mode PFC Boost Conv, I/P 90-265VAC, O/P 380-420V, IOUT 0.375A, EFE 96%, PF 0.99%
15W Isolated Flyback Power Supply, 100V-265VAC I/P Supply, 1.25A/12V O/P, Overload Protection
Offline High-Side Buck Power Supply, 100mA 5V/13VDC O/P, Thermal Shutdown, 85-265VAC Pwr
Step-down Converter, 400kHz Switching, 5A Jumper Selectable Adj/5V/3.3V Single Output, 7-40V Pwr
Synchronous Step-up Converter, 90% Efficiency, 2.2MHz Switching, 3A/9V Output, 3V-5V Power
High Accuracy, 0.02% Maximum Nonlinearity, 0 V to 2 Vrms I/P, Wide Bandwidth 8MHz @ 2Vrms I/P